How to deal with unused road and bridge steel formwork

Road and bridge steel formworkIt is a steel formwork for concrete pouring.Road and bridge steel formworkIt can replace wood formwork, which significantly reduces the removal of pore water pressure and air bubbles in concrete pressure by traditional sealed formwork such as wood board, plywood or steel plate;Road and bridge steel formworkAfter the structural concrete is poured, an ideal rough interface is formed. Rough machining is not required to proceed to the next process.

Road and bridge steel formworkIt can be placed before or after the reinforcement is installed. If it is placed before installing the steel bars, it is convenient and easy to place and install; the concrete pouring process can be visually monitored, thereby reducing the risk of porosity and honeycomb structure.

Road and bridge steel formworkRepair, transformation, scrap how to deal with? Take a look at it.

(1) Under normal use,Road and bridge steel formworkThe department conducts quarterly inspection and evaluation of the main steel formwork of the bridge.

2. After inspection, the bridge steel formwork that needs to be repaired (or modified) should be removed, stacked, and marked in a separate area.Road and bridge steel formworkThe management personnel fill in the application form and report to the project management department for approval.

3, the project management department according to the safety and quality supervision department and material management department to provide the need for transformationRoad and bridge steel formworkThe renovation plan shall be submitted to the project management department for organization and implementation and approved by the chief engineer.

4、Road and bridge steel formworkIf the damage or corrosion is serious and the repair ability is lost, the manager of the user department shall fill in 《Road and bridge steel formworkApplication Form for Scrap shall be submitted to the Engineering Management Department for processing.

5. The Engineering Management Department organizes the Material Management Department and the Safety and Quality Supervision DepartmentRoad and bridge steel formworkIdentification is carried out. Issued by Project Management DepartmentRoad and bridge steel formworkNotice of Scrap. material management department andRoad and bridge steel formworkThe use of departments should beRoad and bridge steel formworkClearly annotated and written off with end-of-life date.

6 Abandoned.Road and bridge steel formworkIt should be dealt with within a time limit, and the places that are too late should be piled up separately.

Road and bridge steel formworkBefore the equipment is put into use, the safety and quality supervision department shall organize a re-inspection, and the products that fail the re-inspection shall be returned to the manufacturing department within a time limit. SpareRoad and bridge steel formworkIt can be put into use again after passing the inspection. And, in the process of use, by the safety and quality supervision department full-time inspector is responsibleRoad and bridge steel formworkSupervision of installation and disassembly quality.